Power Soak 33754 AWI Owner's Manual - Manual (Page 4)

2
Installation
1. Tank Bottom Liner
Begin by placing the tank bottom liner into the bottom of the wash tank. Ensure the
word “FRONT” (engraved into each liner) is face-up, and towards the front of the
wash tank. The liner will fold upwards at the front and rear, so that a few inches of
the front and rear walls are covered. If your system requires more than one liner,
place all of them into the wash tank, side by side. A small gap will remain between
each liner.
The tank liner is necessary to ensure full integrity of your wash tank over its lifetime.