Arcam AVR350 - Manual (Page 34)

AVR350
E-34
These extra commands on code 17 allow full control of the tuner in the AVR350 using the remote control
supplied with the T61/T31. The AVR350 responds to these commands in both the main zone and Zone 2.
System code 17.
Command Command code
Tune down (seek down if
pressed for >1 second) 31
Tune up (seek up if
pressed for >1 second) 30
Seek down 35
Seek up 34
Preset/Tune up 32
Preset/Tune down 33
Preset/Tune mode toggle 37
Preset store 41
RDS programme 62
RDS text 63
RDS frequency 64
Mono 54
Stereo 39
Preset 1 (preset 9 if
pressed for > 1 second) 1
Preset 2 (preset 10 if
pressed for > 1 second) 2
Preset 3 (preset 11 if
pressed for > 1 second) 3
Preset 4 (preset 12 if
pressed for > 1 second) 4
Preset 5 (preset 13 if
pressed for > 1 second) 5
Command Command code
Preset 6 (preset 14 if
pressed for > 1 second) 6
Preset 7 (preset 15 if
pressed for > 1 second) 7
Preset 8 (preset 16 if
pressed for > 1 second) 8
Preset 9 9
Preset 10 110
Preset 11 111
Preset 12 112
Preset 13 113
Preset 14 114
Preset 15 115
Preset 16 116
Preset 17 117
Preset 18 88
Preset 19 89
Preset 20 90
Preset 21 91
Preset 22 92
Preset 23 93
Preset 24 94
Preset 25 95
Preset 26 96
Preset 27 97
Preset 28 98
Preset 29 99
Preset 30 100
In addition to the system ‘17’ commands shown above, Zone 2 also responds to the following
commands.
System code 16.
Command Command code Command Command code
Stand-by 124 SAT input 0
On 123 AV input 2
Power toggle 12 TUNER input 3
DVD input 4
Mute 119 TAPE input 5
Un-mute 120 VCR input 6
Mute toggle ( MUTE ) 13 PVR input ( AUX ) 8
Volume up 16 CD input 7
Volume down 17 DVD-A input 9
Preset/Tune down 57
Preset/Tune up 56
Preset/Tune mode toggle 54
SH174 multi.id2 21/2/06, 09:09 34