Logo – Napoleon Fireplaces FIBERGLOW GLVF18 User Manual
Page 13
13
W415-0809 / B / 01.07.11
4.3 LOGO
PLACEMENT
LOGO
½"
LOGO
½"
Remove the backing of the logo supplied. Centre the logo
on the front of the appliance, ½” in from the left side, as
shown.
4.4 MEDIA
A.
Place lava or ember rock around the base of the
appliance, making sure not to block any burner ports or
valve access. Retain a small amount of lava rock for step
3 and if applicable step 4.
B.
Place formed charcoal lumps around the front and sides
of the appliance.
C.
Use remaining lava or ember rock to blend with the
charcoal lumps.
D.
GVFL30 ONLY: Sprinkle remaining lava rock onto the
outer fi bre ember beds to hide the seam.
GVFL 18
GVFL 24
GVFL 30