ARRI ARRIFLEX 416 - Manual (Page 6)

ARRIFLEX 416 Quick Guide 04/2007, Page 6
Quick Specs
Fps range: 1 to 75 fps, forward only, in 0.001 fps increments
Mirror Shutter: 180º to 45º, manually adjustable
Fixed settings at: 180º, 172.8º, 150º, 144º, 135º, 90º, 45º
Use the following angles for fi lming with non-electronic ballast HMI
or fl uorescent lighting:
180º:
25 fps, 50 Hz supply, 1/50th second exposure time
172.8º: 24 fps, 50 Hz supply, 1/50th second exposure time
150º:
25 fps, 60 Hz supply, 1/60th second exposure time
144º: 24 fps, 60 Hz supply, 1/60th second exposure time
Power: 24 V DC, custom 105 Fischer connector, pin 1 is 0 V, pin 2 is positive,
pin 3 is on-board battery condition monitor
Acceptable range: 21 V to 35 V
Accessory Power: 1 x 24 V RS connector on 416
2 x 24 V RS connectors on 416 Plus
1 x 24 V REMOTE connector
RS & REMOTE connectors combined 2 A continuous, 4 A peak
Note: RS & REMOTE connectors are not regulated so their output voltage tracks the
camera supply voltage.
1 x 24 V Heated Eyecup connector
2 x 12 V MINI MONITOR connector on IVS
MINI MONITOR connectors combined 2 A continuous
Movement: One pull-down fi lm transport claw and one registration pin
Sound Level: Less than 20 dB (A) @ 24 fps
Lens Mount: 54 mm PL mount, Super 16 only
Flange Focal Distance: 51.98 – 51.97 mm
Temperature Range: -20ºC to +50ºC (+4ºF to +122ºF)
Electronic Accessories: OBB-2 416 On-board Battery
LDD-FP Lens Data Display for Focus Puller (Lens Data Archive only)
UMC-3 Universal Motor Controller (Only for 416, not needed for 416 Plus)
EXD-1 External Display
RCU-1 Remote Control Unit
LCS Lens Control System
WRS Wireless Remote System (Yellow washer software only)
WRC-1 Wireless Remote Control
ESU-1 External Synchronization Unit (Accessory expansion cable needed)
ICU-1 Iris Control Unit (Accessory expansion cable needed)
RS-4 Remote On/Off Switch
APB Accessory Power Box (Separate battery or Y-cable needed)
WL-2 Work Light
Other Accessories: MEE-1 235/416 Medium Eyepiece Extension, LEE-1 235/416 Long Eyepiece
Extension, SCH-2 416 Standard Camera Handle, LMS-2 416 Low Mode Set, LRB-2
416 Left Rod Bracket, LWS-5 416 Lightweight Support, BP 10 & 11 Split Bridge
Plates, 416 Steadicam Plate, S-4 Shoulder Set, 16SR 3 fi bre screens, HE-3, 4 & 5
heated eyecups, ARRI On-board Monitors, FF-3 (with bridge plate), FF-4 & 5 (on
lightweight support rods or bridge plate), 15 mm & 19 mm support rod matte boxes
(with bridge plate), ARRI/Zeiss Ultra 16 lenses, ARRI/Zeiss Lightweight Zoom LWZ-1,
ARRI/Zeiss Ultra Prime lenses, ARRI/Zeiss Master Prime lenses, Cooke S-4 lenses.
Not compatible with: 16SR magazines, 16SR on-board batteries, 435 Single Frame Hand Controller,
CCU and ARRICAM electronic accessories.