Merrychef 402s - Manual (Page 12)

12
CLEANING: 1
For the oven to operate at peak efficiency, the cavity, door and air filters and grease filter
must be kept clean.
A daily cleaning routine will ensure that you comply with the required hygiene standards and will help to
maintain and prolong the efficiency of your oven.
Follow the SAFETY INSTRUCTIONS at the beginning of this manual.
• ALWAYS switch off at the electrical supply before
cleaning
• Complete COOL DOWN procedure and allow the
oven and accessories to cool before commencing
cleaning
• As required wipe out spillages with disposable
paper wipes
• NEVER use steel wool, knives or harsh abrasives
on any part of the oven
As with all electrical appliances, it is wise to have the
electrical connections inspected periodically.
Faults arising from neglect or misuse
including use without clean filters in
place are not covered by the
guarantee. Service visits as a result
of such faults will be chargeable.
Hot surface
Hazard
WARNING: DO NOT use caustic cleaners on any part of the oven or oven
cavity as it will cause permanent damage to the Catalytic Convertors
DO NOT use the oven without clean air filters and cavity grease filter in place
1.
Spray Merrychef Oven
Protector onto the sponge
START UP: OVEN COATING PROCEDURE ( clean oven )
4.
Switch on the oven and
press PREHEAT. When
the oven has reached
operating temperature it
will take about 30mins to
cure the Oven Protector. 3.
Spread Oven Protector
lightly onto the internal
surface of the oven door 2.
Spread Oven Protector
lightly onto all internal
surfaces of the oven
Note: oven protector turns light brown when cured