HOUNO CVC ovens - Manual (Page 10)

10
(15) Programming
Use the manual function.
1. Choose any of the desired functions (2, 3, 4, 5, 6, 7).
2. Adjust time, temperature and perhaps exhaust, core temperature and fan speed.
If further steps are needed, press ENTER-STEP.
3. Choose any of the desired functions (2, 3, 4, 5, 6, 7).
4. Adjust time, temperature and perhaps exhaust, core temperature and fan speed.
If further steps are needed, press ENTER-STEP and repeat steps 3 and 4.
Press F1 twice and press 1 to store manual program. The first vacant menu number appears, but
choose any number you like, for instance 100 and above (menu numbers 1 – 98 have been pre-
programmed by the computer manufacturer). Conclude by pressing ENTER-STEP.
Menu numbers can be retrieved either by pressing the number directly via the F1 key or by
"rolling" forwards or backwards in the menus with the arrow keys (2 and 8).
Menu text:
Visualise a cylinder with letters and figures which can be rolled forwards and backwards by
pressing keys
(forwards) and (backwards).
Press to jump to the next letter. Press to go backwards.
With the key 7, you can change between capital letters and small letters.
With the key 0, you can delete a character.
Conclude with ENTER-STEP.
The display will guide you through the whole procedure.