Basic operations – EXONIC EXD 7088GPS1 User Manual
Page 8

9
Power On/Off
Turn on:short-press [
VOL / MUTE/
] in the front panel or [POWER] in the remote control;
Turn off: after being turned off by long-pressing [
VOL / MUTE/
] in the front panel or
[POWER] in the remote control.
MUTE
Short-press [
VOL / MUTE/
] button in the front panel or [MUTE] key in the remote control,
to shut the audio output from system..
Notes:
① If it was muted already, repeat the former action or tune volume to cancel the former muting.
②[MUTE ON] or [MUTE OFF] will be displayed in the up right corner in the TFT, when the
audio is muted or not.
Volume adjustment
Turn the volume knob on the front panel or press the [VOL] key in the remote control.
The adjustable range of volume is 0 to 39.
Main Menu/Source menu and selection
Main menu
Enter main menu after system turning-on, or after pressing [MODE] in the remote control;
Display and choose the playing source
1. Press the source you want to play in the user interface, while the main menu in being
displayed.
2. Press [ ] [ ] below main menu, or slide horizontally in the empty area in the user
interface, switch between pages to choose playing source.
3. press [SRC] in the remote control, to switch among different source.
Notices:
(1) Playing source refers to unit’s working mode, such as DVD, Radio or Camera, etc.
(2) For some external device, its working mode is inaccessible if the device is not connected well.
Reset the unit
If the unit can not work correctly, reset the unit by pressing [RESET] in the front panel, with
something which has slim and sharp tip. All the settings in the setup menu will be reset to
default values.
Basic operations