Airlink 5200 - Manual (Page 6)

AirLink Application Notes
AirLink Communications Page 6 www.airlink.com
You will need to set the Internet
Account, LAN Settings, and
Dial-out Modem parameters.
The Internet Access setup
screen for Ports 1 and 2 has
three requirements:
- ‘Enable’ must be checked
- Tel-1 and Tel-2 should be
entered as shown
- Disconnect after Idle Time
should be set to ‘0’.
This will make sure the
IP5200 does not drop the
PPP connection when the
serial port is idle.
Multi-port Usage
Even though the
IP5200’s (2) serial
ports can be used for
Multi-link PPP, this is
not a feature that can
be used over CDPD
network.