5 “language and region” settings – ARCHOS TV+ User Manual
Page 52
MANUAL
V1.0
TV+
MAIN SETTINGS > P. 5
“Configuration”
it can be “
Automatic (DHCP)
” or “
Manual
”.
if it is “
Automatic (DHCP)
”, then you do not have to enter any more information.
Simply use the “
Connect
” button, and your ARCHOS will connect to this network,
provided the signal is strong enough.
if you must configure the network manually, select the “
Manual
” setting. Other
parameters will appear: the required information can be obtained from the person
who manages the network.
When you have finished entering all the information, use the “
Connect
” button, and
your ARCHOS will connect to this network, provided the signal is strong enough.
Filtered networks: If your network manager allows only specific devices to
connect to the network (known as MAC address filtering), you can supply the
network manager with the MAC address of your ARCHOS. To find out what
your MAC address is, select the “Settings” menu item from the Home screen,
then choose “System”. See: “System” Settings.
7.5 “language and regiOn” seTTings
“Language”
choose a language.
visit www.archos.com to check the availability of other languages. New lan-
guages are included in the firmware as they become available. See
“Select location”
if your clock is set to “
Automatic
” (see
), select your “
Country
”,
and “
City/Zone
”.
“WiFi Region”
this is configured automatically according to how you set your location.
-
-
-
-
-
-
-