ATN MArs x4 - Manual (Page 3)

2
spEcIfIcATIons
pREpARATIon foR opERATIon
Before getting started make sure to follow these steps:
• Install the battery into its housing with the polarity order
shown on the main body of the unit. The CR123A battery
used with adapter. Install adapter first, then CR123A . AA
battery used without adapter.
• Switch on the scope with the protective lens cover still
attached to the lens.
• Make sure that the green luminance of the light intensifier
tube is present.
• Observe the scene, and adjust the diopter and/or lens for
optimal image clarity.
• You may now enter a dark environment or simply shut the
lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
opERATIng
mounTIng
1. Mount the PS-22 with Adapter onto the A.R.M.S.#10 or A.R.M.S.#19 ACOG with 2 screws M5x8.
2. Unscrew the protective back cap from PS-22.
3. Screw the Light Screen into the thread in back side of unit.
4. Slightly loosen the fixing screws or levers of mount.
5. Place the PS-22 on the weaver rail of the fire arm before objective of daytime scope on the
minimal distance from it. The optical axes of PS-22 and daytime scope must have diver-
mARs X4
2nd, 2nd+, 3rd, 4th
F1:1.5
4X
9 deg.
10 m to ∞
45mm
7mm
-6/+2
120MOA
1/4MOA
one 3V (CR123A) or 1.5V (AA)
Super 450mW
-51°C to +45°C
55 (3V)/ 40 (1.5V )hours
20m for 1 hour
Red or Amber On Green
235x90x95mm
1.3kg
Generation .............................
Lens of system ..........................
Magnification ..........................
FOV ..........................................
Range of focus .........................
Eye relif .....................................
Exit pupil ...................................
Diopter adjustment ...............
Windage & elevation ................
Adjustment step size ..............
Power supply ........................
IR illuminator ............................
Operating temperature .......
Battery life................................
Waterproof ...............................
Reticle ....................................
Dimensions .............................
Weight ....................................
mARs X6
2nd, 2nd+, 3rd, 4th
F1:2.0
6X
6 deg.
25 m to ∞
45mm
7mm
-6/+2
80MOA
1/6MOA
one 3V (CR123A) or 1.5V (AA)
Super 450mW
-51°C to +45°C
55 (3V)/ 40 (1.5V )hours
20m for 1 hour
Red or Amber On Green
295x95x100mm
1.55 kg
Battery cap Battery cap
AA
battery
CR123A
battery
Battery
adapter