If you lose a call after changing channels, If you have difficulty reading the base lcd, Answering system – AT&T 1485 User Manual

Page 43: If messages are incomplete, If you have difficulty hearing message, Telephone operation

4 0

TELEPHONE OPERATION

PROBLEM

SOLUTION

If you lose a call after

You were probably almost out of range.

changing channels:

Move closer to the base before changing
channels. Before placing another call,set
the handset in the base for at least 15
seconds.

PROBLEM

SOLUTION

If you are unable

If you have dial pulse (rotary) service,

to operate special

follow the directions under “Temporary

telephone services

Tone Dialing” in the TELEPHONE

or other equipment

OPERATION section of this manual.

requiring touch tone
signals:

PROBLEM

SOLUTION

If you have difficulty

Press

on the base.

reading the base LCD

ANSWERING SYSTEM

PROBLEM

SOLUTION

If messages are

• If a caller leaves a very long message,

incomplete:

part of it may be lost when the system
disconnects the call after four minutes.

• If the caller pauses for more than seven

seconds,the system stops recording and
disconnects the call.

• If the system’s memory becomes full

during a message, the system stops
recording and disconnects the call.

PROBLEM

SOLUTION

If you have difficulty

Check the volume setting.

hearing message:

91-5418-10-00_att1485_r4 2003.6.11 10:24 AM Page 40