AT&T 1485 - Manual (Page 37)

3 4
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Play messages in Press , then the appropriate mailbox
a mailbox number ( , , or ). The system plays
new messages. If there are no new
messages,the system plays old messages.
Repeat a message Press while message is playing;
Press to back up another
message.
Skip a message Press while message is playing;
each press advances another message.
Stop Press .
Save messages Hang up.
Delete message Press while message is playing.
Review announcement Press ; system plays announcement,
then beeps.
Record announcement Press ; after beep, record
announcement, press to stop.
System plays back announcement.
Record memo Press ; then mailbox number where
you want memo recorded;speak after
beep;press
to exit.
End remote access call Press .
Turn system off Press ; the system announces,
“Machine off.” Press again to turn
the system back on.
Turn system on When system is off,it answers after 10
rings and announces,“Please enter your
remote access code.” then enter your
remote access code.
¥
NOTE: If 10 seconds goes by with no keys being pressed then the Voice
Menu will begin. Once the Voice Menu has finished,if no key is pressed
after 20 seconds than the remote access call will end automatically.
91-5418-10-00_att1485_r4 2003.6.11 10:24 AM Page 34