Ask Proxima DP1000X - Manual (Page 4)

ASK Proxima Lamp Information Guide
DP5800 650 2000 Hours
Press and Hold the "Reset" button on the keypad or the
"Timer" button on the remote for three seconds. The
lamp hours used will be displayed.
Press and Hold the "Reset" button on the keypad or
"Timer" on the remote control for three seconds, and
the lamp hours used will be displayed. Release
button. While the Lamp Time is being displayed,
press the "Reset" button on the keypad or the
"Menu" button on the remote. Use the Left Arrow
Button on the keypad or the Mouse disk on the
remote to choose "0" on the screen. Press and Hold
the "Reset" button for three seconds. The lamp timer
will be reset.
DP5900 700 2000 Hours
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp. Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
DP5950 1250 1500 Hours
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp. Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
DP6150 1400 2000 Hours
Press the Menu Button, then choose Advanced, then
Service. Select Info.
Press the Menu Button, choose Advanced, then
choose Service, then Reset Lamp Timer and Press
Select. Note: You must have an active source
connected and displayed on the projector in order to
reset the lamp.
DP6155 2000 2000 Hours
Press the Menu Button, then choose Advanced, then
Service. Select Info.
Press the Menu Button, choose Advanced, then
choose Service, then Reset Lamp Timer and Press
Select. Note: You must have an active source
connected and displayed on the projector in order to
reset the lamp.
DP6500x 2500 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.
Copyright InFocus Corp. 4 7/13/2004