Panasonic ES-LV65-S - Manual (Page 13)

13
English
Cleaningtheshaver
We recommend that you clean your shaver with the sonic vibration
cleaning mode when the faucet symbol appears on the lamp
display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring to unlock the
power switch.
4. Press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and
press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode and clean it with
running water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
4
5
7
Replacingthesystemouterfoilandtheinnerblades
appears on the lamp display once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the power switch for more than 30 seconds to turn off .
system outer foil once every year
inner blades once every two years
►Removingtheouterfoilsection
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attachingtheouterfoilsection
After turning the foil frame mark ( ) to the front,
securely attach the outer foil section to the shaver
until it clicks.
►Replacingthesystemouterfoil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark ( ) and the
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
2
1 1
ES-LV65_US.indb 13 2013/07/19 10:25:58