Panasonic KX-TGA290B - Manual (Page 2)

– 2 –
Charging the battery
Place the cordless handset on the charger and
charge for 6 hours before initial use.
• The unit beeps once, the CHARGE indicator lights
and “Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed if there are no new calls in
the Caller List.
• Recharge the battery when:
— “Recharge battery” is displayed on the
cordless handset,
— “ 3 ” flashes, or
— the cordless handset beeps intermittently while it
is in use.
• If the battery has been discharged, the cordless handset will display “Charge for 6
HRS” and “ 4 ” when you place the cordless handset on the charger. The cordless
handset will not work unless the battery is charged. Continue charging.
Handset battery information
After your Panasonic battery is fully charged, you can expect the following performance:
• Clean the charge contacts of the cordless handset and the charger with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
Belt Clip
You can hang the cordless handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip
Operation Operating time
While in use (TALK) Up to 6 hours
While not in use (Standby) Up to 14 days
While using the Clarity Booster feature Up to 4 hours
CHARGE
Indicator
Charge
Contacts
1
2
While pressing the top of the clip ( 1 ),
pull the right edge in the direction of the
arrow (
2 ).
TGA290_OI_ENGSPA_ZA.fm Page 2 Friday, October 8, 2004 10:01 AM