Panasonic EYFEA1N2S - Manual (Page 14)

- 14 -
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you wish to discard these
items, please contact your local authorities or dealer and ask for the correct method of
disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
VII. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine,
or other volatile solvents for cleaning.
In the event that the inside of the tool or battery pack is exposed to water, drain and
allow to dry as soon as possible.
Carefully remove any dust or iron filings that collect inside the tool. If you experience any
problems operating the tool, please contact your nearest authorised service center.
VIII. ACCESSORIES
Use only bits suitable for size of drill's chuck.
IX. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model EYFEA1N
Screw
driving
Machine screw
Low : M5
High : M4
X. SPECIFICATIONS
MAIN UNIT
Model EYFEA1N
Motor voltage 7.2 V DC
No load
speed
Low 0 - 300 min -1 (rpm)
High 0 - 900 min -1 (rpm)
Maximum
torque
Low 6.0 N·m (61 kgf-cm, 53.24 in-lbs)
High 2.0 N·m (20 kgf-cm, 17.75 in-lbs)
Clutch torque
Approx. 0.3 N·m (3 kgf-cm, 2.6 in-lbs) –
4.0 N·m (41 kgf-cm, 35.6 in-lbs)
Overall length 145 mm (5-7/10")
Weight (with battery pack) 0.63 kg (1.39 lbs)
EYFEA1N_US.indb 14 2011-3-9 15:13:51