Panasonic TC-58AX800U - Manual (Page 148)

- 148 -
3D settings
MENU Menu > Picture > 3D settings
Auto detect 3D
(
Auto 1/Auto 2/Off)
Auto 1:
Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2:
Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note:
● Choose 3D mode manually when auto detection is not available.
3D signal notification
(
On/Off)
On:
Displays a message according to the signal received by the Auto
detect 3D .
3D refresh rate
(
96Hz /100Hz/120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
● Gray-out in 2D mode
: 24 Hz only
2D→3D depth
(
High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.