Specifications unpacking – Panasonic FV-08VSL1 User Manual

Page 4

SPECIFICATIONS

UNPACKING

Specifications are based on HVI standard.

Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.

GENE AL SAFETY INFO MATION

1. Do not install this ventilating fan where air temperature may exceed 40 C (104 F).

2. Make sure that the electric service supply voltage is 120 V, 60 Hz.

3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the

Occupation Safety and Health Act (OSHA).

4. Always disconnect the power source before working on or near the fan, motor, light fixture or junction box.

5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects.

6. Do not kink the power cord.

7. Do not install the unit where ducts are configured as shown in Fig. A.

8. Provide suction parts with proper ventilation.

9. This unit is UL listed for use over a bathtub or shower when installed in a GFCI protected branch circuit.

Noise

(sones)

Duct

diameter

(inches)

(cfm)

944

1.3

18 X 2

FV-08VSL1

(rpm)

12.8 (5 )

Fig. A

Prohibition

Adaptor

Prohibition

Lighting unit

Fan body

10. This product has a fluorescent lamp that contains mercury. Disposal may be regulated in your community

due to environmental considerations. For disposal or recycling information, please contact your local
authorities or the Electronics Industries Alliance:http://www.eiae.org