Panasonic 36PET1U6 User Manual

Page 22

3-12. Installing the Rear Panel on the Wall

Be sure to confirm that the wall is strong enough to suspend

the unit.

See either Item a) or b) below depending on the wall type.

a) If Wooden Wall

(1) Attach the rear panel to the wall with the 10 screws pro-

vided. (Fig. 3-25)

If you are not able to line up the holes in the rear panel

with the beam locations marked on the wall, use toggle

bolts to go through the holes on the panel or drill 3/16"

dia. holes in the panel over the stud locations and then

mount the rear panel.

(2) Double-check with a ruler or level gauge that the panel is

level. This is important to install the unit properly.

(Fig. 3-26)

(3) Make sure the panel is flush against the wall. Any space

between the wall and unit will cause noise and vibration.

b) If Block, Brick, Concrete or Similar Type Wall

Make 3/16" dia. holes in the wall. Insert rawl plugs for appropri-

ate mounting screws. (Fig. 3-27)

3/16"
dia. hole

1-3/16" or more

Rawl plug
(Field supply)

Fig. 3-27

Fig. 3-26

Fig. 3-25

Panasonic_PAC-i_IndoorUnit_US-le22 22

2011/11/02 15:17:19

This manual is related to the following products: