Panasonic SCPM46 - Manual (Page 8)

RQTV0301
8
8
ENGLISH
Discs
Basic play Basic play
CD MP3
1 Press [ y] to turn the unit on.
2 Press [ 0] to open the disc tray and then load the disc.
Press [ 0] again to close the tray.
Label must
face upward
Disc tray
3 Press [CD 6] to start play.
4 Adjust the volume.
To Action
stop the disc Press [CLEAR 7].
pause play Press [CD 6].
Press again to resume play.
skip tracks Press [ /REW/ 4] or [ /FF/¢].
search through
tracks
CD
Press and hold [ /REW/ 4] or [ /FF/¢]
during play or pause.
skip album
MP3
Press [ALBUM or ] in the play mode.
Press [ALBUM or ] once and then the
numeric buttons in the stop mode.
Play Mode function
CD MP3
1 Press [CD 6].
2 Press [PLAY MODE] to select the desired mode.
Mode To play
1-TRACK
1TR
one selected track on the disc.
Press the numeric buttons to select the
track.
1-ALBUM
1ALBUM
MP3
one selected album on the disc.
Press [ALBUM
or ] to select the
album.
RANDOM
RND
a disc randomly.
1-ALBUM RANDOM
1ALBUM RND
MP3
all tracks in one selected album randomly.
Press [ALBUM
or ] to select the
album.
Note
• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.
• The current play mode is cleared when you open the disc tray.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
Display function
This function allows you to display the information of the current
track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed play time Remaining play time
MP3
Elapsed time Album name Track name
ID3 (Artist) ID3 (Track) ID3 (Album)
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
Advanced play Advanced play
Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ ” is cleared.
Program play
This function allows you to program up to 24 tracks.
CD
1 Press [CD 6] and then [CLEAR 7].
2 Press [PROGRAM].
3 Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4 Press [CD 6] to start play.
MP3
1 Press [CD 6] and then [CLEAR 7].
2 Press [PROGRAM].
3 Press [ALBUM or ] to select your desired album.
4 Press [ /FF/ ¢] once and then the numeric buttons to
select your desired track.
5 Press [ENTER].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD 6] to start play.
For two-digit track, press [ h10] once then the two digit.
For three-digit track, press [ h10] twice then the three digit.
To Action
cancel program mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD 6].
check program
contents Press [ /REW/ 4] or [ /FF/¢] when
“PGM” is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [ /REW/
4] or [ /FF/¢].
add to the program CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all programmed
tracks Press [CLEAR 7] in the stop mode.
“CLR ALL” is displayed. Within 5 seconds,
press the button again to clear all tracks.
Note
• When you try to program more than 24 tracks “PGM FULL” appears.
• The program memory is cleared when you open the disc tray.
CD
• During program play, you can search backward or forward only
within the current track.
PM46_E_EN_new23.indd 8 PM46_E_EN_new23.indd 8 1/10/08 10:36:55 AM 1/10/08 10:36:55 AM