AEG FM 4803K-AN - Manual (Page 17)

28
Installation
Electrical Installation
Connecting the Appliance
Installation may only be per-
formed by a qualified elec-
trician or a person autho-
rised by the manufacturer.
Work performed by an
unqualified person may
cause injury or damages to
property and deteriorate the
hob.
Single phase
Type of cable: 2,5 mm2 twin and
earth.
Installation must comply with any
special requirements laid down by
the local energy provider. The prod-
uct must be connected via an exter-
nal switch with a contact gap of at
least 3 mm. (May be the main
switch).
L
L1
N
PE
L2
N
17
Autostop
If by mistake one or more cooking
zones have not been
switched off
Autostop will automatically
switch off
the hob after a certain amount of
time. The time depends on the
heat set-
ting
selected. See below table. When
Autostop has been
activated the
indicator light for k
flashes.
Push
k
to reset Autostop.
Setting Max hours before auto
turn-off
6
5
4
1,5 1-2
3-4
5
6-9
Safety
Switch-off
If one of the keys are activated for
more than 10 seconds (e.g. by a
child, pot spillage etc.) the hob is
automatically
switched off.