Panasonic SCPT70 - Manual (Page 10)

10
RQ
TX10
24
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
ENGL
ISH
Except [DivX]
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
[Only when “5.1ch layout” mode is selected in “Speakers position” (B 8,
Easy setup settings).]
Preparation
≥ To display the picture, turn on the TV and select the appropriate video
input mode.
≥ Press [r, s VOL]> to adjust the volume to normal listening level.
≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
(B 16).
[Effective only when “5.1ch layout” mode is selected in “Speakers
position” (B 8, Easy setup settings) and playing 5.1-channel sound.]
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode
(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
[Note]
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your TV screen, press [∫ STOP]5
when you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
≥ ABOUT DIVX VIDEO:
DivX ® is a digital video format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Center Focus
(Effective when playing audio containing center channel
sound.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS ON
,------.C.FOCUS OFF
Whisper-mode Surround
Press [W.SRD]<.
Each time you press the button:
WHISPER-MODE SRD ON
,--.WHISPER-MODE SRD OFF
Adjusting the speaker output level manually
1 Press [OK]9 to enter test tone mode.
Test tone will be output to each channel in the following order.
LEFT, CENTER, RIGHT, SURROUND RIGHT, SURROUND LEFT
e.g.
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
2 Press [OK]9 then [3, 4]9 to adjust the speaker level
for each speaker. (CENTER, SURROUND RIGHT,
SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP];.
To adjust speaker level during play
1 Press and hold [—CH SELECT]; to select the speaker.
While the speaker channel is displayed, press [—CH SELECT];.
L
# C# R# RS# LS# SW
^---------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a subwoofer
channel.
≥ “S” appears on the main unit’s display when you have selected “S.SRD”
(B 9, Enjoying surround sound effects). In this case, you can adjust both
surround speaker levels at the same time using [3, 4]9.
S: `6 dB to i6 dB
2 Press [3]9 (increase) or [4]9 (decrease) to adjust the speaker
level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.) (B below)
Adjusting the balance of the front speakers
1 Press and hold [—CH SELECT]; to select “L” or “R”.
2 While “L” or “R” is selected, press [2, 1]9.
1 Press [Í/I]1 or [Í]1 to turn on the unit.
2 Press [DVD]@ to select “DVD/CD”.
3 Press [< OPEN/CLOSE]2 to open the disc tray.
4 Load the disc.
≥ Load double-sided discs so the label for the
side you want to play is facing up.
5 Press [1]8 or [1 PLAY]5 to start play.
≥ Press [r, s VOL]6/> to adjust the volume.
Basic controls
One touch play (remote control only): [1 PLAY]5
(during standby mode)
The main unit automatically turns on and starts playing the disc in the
tray.
Stop: [∫ STOP]5
The position is memorised while “RESUME STOP” is on the screen.
≥ Press [1 PLAY]5 to resume.
≥ Press [∫ STOP]5 again to clear the position.
Label facing up
Pause: [; PAUSE]5
≥ Press [1 PLAY]5 to restart play.
Skip: [:, 9 SKIP]5
Search: [6, 5]5 (during play)
≥ Up to 5 steps.
≥ Press [1 PLAY]5 to start normal play.
Slow-motion: [6, 5]5 (during pause)
≥ [VCD] Slow-motion: Forward direction only.
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Frame-by-frame: [2;, ;1]9 (during pause)
[DVD-VR] [DVD-V] [VCD]
≥ [DVD-VR] [VCD] Forward direction only.
On-screen item select: [3, 4, 2, 1, OK]9
[3, 4, 2, 1]9: Select
[OK]9: Confirm
Enter number: Numbered buttons
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12: [S10]3 B [1] B [2]
[VCD] with playback control
Press [∫ STOP]5 to cancel the PBC function, and then press the
numbered buttons.
[DVD-V] Show a disc top menu: [TOP MENU]8
[DVD-V] Show a disc menu: [MENU]:
Return to previous screen: [RETURN]E
[VCD] (with playback control) Show a disc menu: [RETURN]E
Main unit display: [FL DISPLAY]G
[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]
Time display
,-.
Information display (e.g. [DVD-VR] Program number)
[JPEG]
SLIDE
,-.
Contents number
10
SC-PT70EP-RQTX1024-Z_eng.book Page 10 Thursday, August 20, 2009 10:19 AM