Panasonic SCXH155EP - Manual (Page 20)

20
RQ
T
9
5
33
G
e
tti
n
g
S
tar
ted
P
layi
n
g
Di
scs
Ot
h
e
r Op
e
ra
ti
o
ns
Refer
e
n
c
e
EN
G
LI
S
H
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
Speaker installation option
Attaching to a wall
e.g., Surround speaker
DO NOT DO
≥ In this position, the speaker will
likely fall if moved to the left or
right.
≥ Move the speaker so that the
screw is in this position.
At least 30 mm
‰ 7.0 mm to ‰ 9.4 mm
Wall or pillar
3 mm to 5 mm
‰ 4.0 mm


 



 
Surround speaker Center speaker
A 17.6 mm
B 98.7 mm
C 40 mm
D 40 mm
Front speaker
Attach to a wall without the base and the stand
Reattaching the speaker cable


 

J 64.5 mm
K 348.5 mm
L 109.5 mm
M 50.3 mm
N 50.3 mm
Wall
Screw eye
(not supplied) String (not supplied)
Less than
10 cm
Insert the cable
from the bottom. Pull out the cable
through the hole.
Leave about
120 mm.
20
E 16.7 mm
F 63.7 mm
G 23 mm
H 96 mm
I 26 mm
SC-XH155 EP_eng.book Page 20 Tuesday, January 18, 2011 10:37 AM