Avenview C-COMPVGA-HDM - Manual (Page 8)

www.avenview.com 8
1.8 Installation
To setup Avenview C-COMPVGA-HDM follow these steps for connecting to a device:
1. Power off display source such as DVD Player, Set-top box, PC etc.
2. Connect VGA or Component source to the video input
3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack
4. Connect VGA/Component Adapter to VGA or Component input of the device
5. Connect HDMI cable to device and TV or projector
6. Plug in 5V DC power cord to power jack of C-HDM-COMPVGA
7. Power on C-COMPVGA-HDM converter
8. Power on VGA / Component source and display with HDMI input.
S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF
receiver must be able to recognize the input S/PDIF format. C-HDM-DVIA only separates the
digital audio in HDMI stream and bypasses this decoded audio to the output.
This version does NOT support 8 Channel analog audio applications
S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48
KHz audio sample rate.