Audiovox AXWD2002 - Manual (Page 28)

– 28 – EN
1L25
PROGRAM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program screen will appear.
CD
PROGRAMA TIEMPO 0:00:00 1/1
ALEATORIO: MODE SALIR: RETURN
INICIAR: PLAY SUPRIMIR: CLEAR
--
02 05 07 04 10 14 06 15 21 08
20 28 10 25 35 12 30 42 11 34
49 16 40 58 18 45 63 01 03 _
PROGRAMA TIEMPO 2:07:43 1/1
ALEATORIO: MODE SALIR: RETURN
INICIAR: PLAY SUPRIMIR: CLEAR
ZOOM PLAYBACK
(enlargement on-screen)
Images can be enlarged on the screen to your taste.
1 Press the ZOOM button during playback.
¡ The image will be enlarged at the center of the
screen.
¡ Pressing the ZOOM button cycles the zooming
images in two steps.
VCD DVD
ZOOM [x4] ZOOM [x2] ZOOM [APDO.]
2 When the Arrow button ( K / L / s / B ) is
pressed during zoom play, the part to be
zoomed moves.
¡ The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when times 2 zoom-
ing. The frames will move 6 steps when times 4
zooming (VCDs: 4steps).
¡ The current position will be displayed on the right-
bottom of the screen. Press the ENTER button, and
the display will disappear.
Note
¡ Zooming function does not work while the disc
menu is being shown.
2 Press the Number buttons to enter the
desired track numbers.
¡ 50 programs can be displayed
at once on the screen. Press the
Arrow button (
L ) to go to the
next page.
3 Press the PLAY button.
¡ Playback will start in the programmed order.
¡ While the program is being played back, the STOP
button works as follows.
¡ Press the STOP button once and then press the
PLAY button again. Playback will restart from the
point where the STOP button was pressed. (Program
continued)
TO CLEAR THE PROGRAM
1 Press the STOP button twice, and the pro-
gram will be cleared.
Notes
¡ Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡ Press the CLEAR/C.RESET button to cancel a pro-
gram. The most recently entered program will then
be deleted.
¡ Up to 99 programs can be entered.
¡ Playback from a desired track and random playback
are not available during program playback.
¡ Program settings will be cleared when the power is
turned off or the disc loading tray is opened.
¡ Press the MODE button to check the programmed
setting.
¡ The programs will be cleared when you turn the
power off.
H9201MD.qxp 02.11.28 11:38 AM Page 28