Audiovox GC-600 User Manual

Page 3

the volume higher than the memory setting, the unit will return to the memory
setting when turned back on. If, however, the unit is turned off with the volume
lower than the memory setting, the unit will return to the lower setting when
turned back on.

BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select knob

once so that the “BAS” indication appears on the display panel. Within 5

seconds of choosing the Bass mode, turn the knob clockwise to increase the
bass response or counter-clockwise to decrease the bass response as desired.
The level will be shown by the bars on the display panel from a minimum of

to a maximum of

(the diamond in the

center of the display represents flat response). The display will automatically
return to the volume indication 5 seconds after the last adjustment is made.

MIDRANGE CONTROL

To adjust the midrange level, first select the Midrange mode by pressing the
Select knob

twice so that the “MID” indication appears on the display panel.

Within 5 seconds of choosing the Midrange mode, turn the knob clockwise to
increase the midrange response or counter-clockwise to decrease the midrange
response as desired. The level will be shown by the bars on the display panel
from a minimum of

to a maximum of

(the

diamond in the center of the display represents flat response). The display will
automatically return to the volume indication 5 seconds after the last adjustment
is made.

TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing the Select
knob

three times so that the “TRE” indication appears on the display panel.

Within 5 seconds of choosing the Treble mode, turn the knob clockwise to
increase the treble response or counter-clockwise to decrease the treble
response as desired. The level will be shown by the bars on the display
panel from a minimum of

a maximum of

( the diamond in the center of the display represents flat

response). The display will automatically return to the volume indication 5
seconds after the last adjustment is made.

LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by
pressing the Select knob

four times so the “BAL” indication appears on the

display panel. Within 5 seconds of choosing the Balance mode, turn the knob
clockwise to adjust the stereo balance to the right channel speakers or counter-
clockwise to adjust it to the left channel speakers. The balance position will be
shown by the bars on the display panel from L

R (full left)

to L

R (full right). When the volume level between the left

and right speakers is equal, L

R will be shown on the display

panel. The display will automatically return to the volume indication 5 seconds
after the last adjustment is made.

-2-

- -