Alpine CDM-7892R - Manual (Page 20)

18
-EN
SETUP Operation
Setting the AUX Mode
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface cable
KCM-122B) to this component.
1
Press and hold the SETUP button for at least 3 seconds.
2
Press the g DN or f UP button to select the AUX
mode.
3
Press the BAND button to toggle the mode between
AUX ON and AUX OFF.
4
Press the SETUP button to return to normal mode.
5
To adjust the volume, etc., first press the SOURCE
button and select the AUX mode, then make the
necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, a CD Changer cannot be used.
BAND
f UP g DN SETUP
SOURCE
Demonstration
This unit has the Demonstration feature which simulates
the display functions on the display panel.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the
"DEMO" mode.
3
Press the BAND button to turn on or off the DEMO
mode.
Each press toggles between "DEMO ON" and "DEMO
OFF."
If no buttons are pressed 30 seconds after the DEMO
mode is turned ON. The DEMO mode then begins.
NOTE
The initial setting at the factory is "DEMO ON."
4
Press the SETUP button again to return to normal
operation.