Panasonic KITE18HB4EA - Manual (Page 7)

7
ENGLISH
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
2
SET
Select ON or
OFF timer.
Set the time. Confi rm.
• To cancel ON or OFF timer, press ON or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control Preparation at back
cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET .
OPTIONAL SETTINGS OPTIONAL SETTINGS
CLOCK
Press and hold for approximately 10
seconds to show 12-hour (am/pm) or
24-hour time indication.
RESET
Press to restore the remote control’s
default setting.
Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
• and
QUIET
can be activated in all modes
and can be cancelled by pressing the respective
button again.
• and
QUIET
can not be selected at the
same time.
TO SELECT FAN SPEED
(5 OPTIONS)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
AIR SWING
AUTO
MANUAL
TO ADJUST AIRFLOW DIRECTION
AIR SWING
AUTO AIR SWING – AUTO
• The vertical airfl ow louver
swings up and down
automatically.
• In heat mode, the air blows
horizontally for a while, then
starts to blow downwards.
AIR SWING
MANUAL
AIR SWING – MANUAL
• The airfl ow direction can be
adjusted as desired by using
remote control.
• Do not adjust the vertical
airfl ow direction louvers by
hand.
• The air is discharge evenly
through 4 output vents.
TO ACHIEVE TEMPERATURE
QUICKLY
QUIET TO ENJOY QUIET
ENVIRONMENT
• This operation reduces airfl ow noise.