Panasonic KITE18HB4EA - Manual (Page 6)

6
CANCEL
OFF
TIMER ON
TIMER
SPEED
FAN
AUTO
HEAT
DRY
COOL
OFF
TIME
R
ON
1
2
3 OFF
CLOCK
RESET
SET
TEMP
AIR SWING
OFF/ON
QUIET
AUTO
MANUAL
CHECK
PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Remote control
display
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control display
to prevent the unit from starting/stopping improperly.
TEMP
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature could
induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During operation
mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks during this
operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
Control Panel
Air fi lter
Airfl ow direction louver
Intake grille
Receiver
Maximum distances: 8m
Auto OFF/ON button
• Used when remote control is misplaced or
malfunction.
Step Action Mode
1 Press once. Automatic
2
Press and hold until you
hear one beep, then release.
Force
cooling
3
Repeat step 2. Press and
hold until you hear two
beeps, then release.
Normal
cooling
4
Repeat step 3. Press and
hold until you hear three
beeps, then release.
Force
heating
Press the button to turn off.