Argus Camera 300 - Manual (Page 5)

5
1. Installing PC Camera and PC Camera driver
Before installing Camera to your computer, make sure Windows starts up. Then follow the
steps below:
1. Plug PC camera's connector to the USB port
on your computer. (See Figure 2)
2. Check to make sure you have the correct
orientation while plugging the USB connector
into the USB port of your computer.
3. Once Windows has detected new hardware
added to the system, an USB Device
message appears on the screen, asking you
to search a new device.
4. Click “ Next ” to continue.
5. In the next dialog box, you will be asked to select a method to search for the driver for
your PC Camera. Choose “Search for a suitable driver for my device (Recommended).”
6. Insert PC Camera Installation CD into your CD-ROM drive.
Note: Close auto-run window while inserting CD into CD-ROM drive.
7. Click “Next” to continue.
8. The next screen shows the default path for the camera driver, depending on the existing
operating system on your PC. For example:
Letter D indicates the location of your
CD ROM drive. Click “Browser” to select driver location
CD-ROM:\Driver on your CD.
Windows Installation of PC300 Camera and PC300 Driver
Figure 2