Agilent Technologies EN 61000-3-2 - Manual (Page 3)

3
Table of Contents
Notice 2
Warranty 2
Limitation of Warranty 2
Revisions 2
Printing History 2
Table of Contents 3
1 INTRODUCTION 7
How to Use this Manual 7
The Agilent 6800-Series AC Power Source/Analyzer 8
The Agilent 14761A Harmonic/Flicker Test System Software 8
EN 61000-3-2 and EN 60555 Part 2 Regulations 9
Compliance Testing Implementation 9
EN 61000-3-3 Regulation 10
Compliance Testing Implementation 10
2 INSTALLATION 11
Install the Software 11
Connect the Equipment 11
Installing Interface Card Drivers for Windows 3.1 or 3.11 Systems 12
Installing Interface Card Drivers for Windows 95 Systems 12
Installing Interface Card Drivers for Windows NT 4.0 Systems 12
Verify the Configuration 12
Default Settings 14
Getting Around in the Application 14
Drop-down Menu 14
Menu Tabs 16
3 SETTING UP THE TEST 17
Select a Test Type 17
Create a Template 19
Select the Test Setup Options for Quasi-stationary or Fluctuating Harmonics 20
Standard Test Options 20
Advanced Test Options 21
Test Termination Options 23
Select the Test Options for Voltage Fluctuations 24
Standard Test Options 24
Advanced Test Options 25
Test Termination Options 26
4 RUNNING THE TEST 27
To Run a Pre-test for Quasi-stationary or Fluctuating Harmonics 27
Pre-Test Summary 27
Pre-Test Power Statistics 29
Pre-Test Source Harmonics 30
To Run a Pre-test for Voltage Fluctuations 31
Pre-Test Summary 31
Pre-test Measurements 32
To Run a Test 33
Test Status Information 35
Validation Mode 36