Panasonic NTDP1 - Manual (Page 7)

12 13
English
How to Use
~Toasting bread~
1 Plug in and insert the slice(s) of bread into the insertion slots.
Note
Make sure the crumb tray is clean and set in place correctly before plugging in.  ●
When toasting a slice of bread, use either insertion slot.  ●
2 Lower the toast lever until it locks.
The number of the selected level on the browning level indicator  ●
will light up until toasting is completed.
After a period of time, the indicator starts flashing from level 1, and
 ●
rises up the indicator as browning progresses, up to the selected
level.
The toast will pop up automatically. If the toast do not pop up fully,
 ●
lift the toast lever up manually.
e.g. When it set on 4.
( Browning control range is from 1 to
5 on NT-DP1.
To change toasting color.  
The toaster memorises the previous setting. If you wish to change setting, press the browning control button
shortly after following steps 1 and 2 in “Toasting bread”.
The browning level indicators will light up and change each time the button is pressed.
Note
When toasting a single slice of bread, the colour will be darker than that  ●
when toasting two slices of bread.
Toasting colour may vary depending on the thickness and type of
 ●
bread, as well as the room temperature and humidity.
(Dry bread browns faster than fresh bread.)
(Darker)
(Lighter)
To toast frozen bread  
Press the defrost button shortly after following steps 1 and 2 in “Toasting
bread”.
To reheat toast  
Press the reheat button shortly after following steps 1 and 2 in “Toasting
bread”.
Note
The browning control cannot be applied to the reheat function.  ●
To cancel toasting or reheating bread  
Press the stop button to cancel toasting bread.
The toast lever will lift up and bread will pop up.
Note
The defrost and reheat buttons light up when they are pressed.  ●
If the buttons are pressed again while light stayed on, the selected
function will be canceled and toasting function will be activated.
)
~Warming up buns~
1 Plug in and lower the warming rack lever until it
locks.
1 4
3
2
2 Place buns on top of the warming rack.
Note
Do not place frozen, buttered, coated, iced or filled buns or  ●
aluminium foil.
3 Lower the toast lever and set the browning level on 1.
The toaster will be turned off automatically.  ●
If the buns are not warm enough, repeat step 1 to 3.  ●
Note
Do not set browning level on level 2 or higher.  ●
4 Remove the buns and lift the warming rack lever.
Note
Beware of the warming rack and body, it is hot.  ●
When toasting bread or warming buns consecutively
When toasting bread or warming buns consecutively for more than 4 cycles, rest the toaster for more than  ●
1 minute after each cycle.
When toasting bread consecutively, toasting colour may vary slightly.
 ●