beautypg.com

Fitting the door handles, Levelling, Door reversibility – AEG A62900GSX0 User Manual

Page 18

background image

Install the spacers on the back side of the panel.

Fitting the door handles

(Example for right hinge performance)

The handles are supplied as a kit at delivery.
1.

Screw the top handle bracket to the

handle rod.

2.

Fit the bottom handle bracket on the

lower left-hand side of the door.

3.

Fit the top handle bracket on the top

left-hand side of the door.

4.

Screw the handle rod to the bottom

handle bracket.

Do not use excessive force and overtighten

the screws (max. 2 Nm) as you may damage

the door handles.

Levelling

When placing the appliance ensure that it stands

level. If necessary adjust the feet using the adjust-

ment spanner supplied.

Door alignment is dependent on proper levelling.

Door reversibility

To change the opening direction of the door, do these steps:
1.

Remove the plug from the power.

2.

Remove the ventilation grille. Remove the upper filling and install it on the opposite

side of the grille.
Remove the pedal hole cover and install the cover provided in the accessory bag on

the opposite side.

3.

Lay down the appliance back side down on a wooden support.

1

2

4

3

18

Installation

This manual is related to the following products: