Turn on the power switch. (press “ ”), Remove from the power base and pour – Panasonic NCZK1VXE User Manual
Page 21

21
English
3
Turn on the power switch.
(Press “ ”)
4
Remove from the power
base and pour.
Start boiling the
water.
(
Power indicator
lights up.
)
When the water has boiled, the power
switch turns off automatically.
The kettle takes around 3 minutes to boil.
•
(
Water temperature 23°C, room
temperature 23°C, water to max level
To stop boiling before the
•
water has boiled, turn off
the power switch.
Note
Immediately after the water has boiled,
•
do not force the kettle to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
)
During use, the power
indicator lights up.
0.6
1.0
Max
1.4
After use, pour out any remaining
water.
0.
6
1.0
Max 1.
4
* Keep the lid closed when pouring
away the water.
0.6
1.0
Max
1.4
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
Allow the body to cool sufficiently.
Remove the body from the power base and fill the water.
Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.