Akai MPC5000 - Manual (Page 7)

3
„ PAD MUTE
To turn on Pad Mute Quantization, do the following:
01. Press the [TRACK MUTE] Button
This will open the TRACK MUTE Page.
02. Press the [F3] (PdMUTE) button to select the PAD MUTE Tab.
03. Press the [F5] (T.C.) button.
The [F5] button will darken to indicate it is active as shown on the right.
04. Press a pad you would like to mute.
The MPC5000 will mute the selected pad on the next division of the T.C. setting.
Tip: For more information on Pad Mute, see page 81 of the MPC5000 Reference Manual.
For more information on Timing Correct, see page 24 of the MPC5000 Reference Manual.
„ Changing the Timing Correct for Pad / Track Mute Quantization
To change the Timing Correct value while in TRACK or PAD MUTE Mode,
press the [WINDOW] Button. This is separate from the MAIN Timing
Correct, and is used exclusively for Pad / Track Mute. The following
divisions are available:
2 Bar
1 Bar
1/4
1/4(3)
1/8
1/8(3)
1/16
Change Sequences in Track Mute Mode
The ability to change sequences when in TRACK MUTE Mode has been added. To change Sequences in TRACK MUTE Mode,
do the following:
05. Press the [TRACK MUTE] Button
This will open the TRACK MUTE Page as shown on the right.
06. Press the [F1] (TkMUTE) button to select the TRACK MUTE Tab.
07. Select the 'SQ' field.
08. Press the [+] / [-] buttons or turn the [DATA] wheel to select the
next sequence.
The next sequence to be played will be indicated with an '>' as shown on the
right. The Sequence will change to the selected sequence at the end of the
current sequence.