Panasonic S100PT2E5 - Manual (Page 7)

7
E
NGLISH
Tips for Energy Saving
Attention:
Never use your hands to move the fl ap (vertical airfl ow fl ap)
controlled using the remote controller.
Note
When the air conditioner is turned off, the fl ap (vertical air-
fl ow fl ap) automatically moves to the downward position.
The fl ap (vertical airfl ow fl ap) moves to the upward position
during standby operation for heating.
The swing operation starts after the standby operation has
fi nished, but “Swing” is indicated on the remote controller
even during the standby operation.
Avoid
Do not block the air intake and outlet of the unit.
(If either is obstructed, the unit will not function
well, causing malfunction.)
During cooling operation, use sunshades, blinds or cur-
tains to prevent direct sunlight from entering the room.
Do
Always keep the air fi lter clean.
(A clogged fi lter will impair the performance of the unit.)
→ “Maintenance” (P.8)
To prevent conditioned air from escaping, keep win-
dows, doors and any other openings closed.
Adjusting airfl ow direction
for multiple indoor units (Timer remote controller only)
When setting the airfl ow direction of
each indoor unit individually
1
Press to select the Unit No.
for adjustment.
2
Press to select your desired
airfl ow direction.
When setting the airfl ow direction of
all indoor units at the same time
1
Press to select No display .
2
Press to select your desired
airfl ow direction.
1-1
1-2
1-3
1-4
1-8
“UNIT” button
“FLAP” button
Maximum of
8 indoor units
can be connected.
Unit No.
When operating multiple indoor units using 1 remote controller, airfl ow direction can be adjusted for indoor each unit individually or
all units at the same time.
e.g.) 1 outdoor unit
and
8 indoor units
No display
1-1
1-2
1-3
1-4
2-1
2-4
e.g.) 2 outdoor units
and
4 indoor units
No display
1-1
1-2
1-3
1-4
1-8
F569021.indb 7 F569021.indb 7 2013/06/07 9:38:00 2013/06/07 9:38:00