Sony KDL-70XBR7 - Manual (Page 3)

− −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL500)
Step 4: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1 Disconnect all the cables from the TV.
2 Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the “Screw and Hook Locations Diagram/Table” shown below.
 Secure the Mounting Hooks to the rear of the TV using only the supplied screws
(+PSW6 × 6).
 Be sure to tighten the screws with equal torque strength.
Square
hole
Tab
Mounting Hook
Square
hole
Screw
(+PSW
6 × 16)
Align the tab on the
rear of the Mounting
Hook with the
square hole on the
rear of the TV as
illustrated.
Screw and Hook Locations Diagram/Table
Model Name Screw Locations Hook Location
KDL-70XBR7 d, g a
Screw Location
When installing the Mounting Hook on the TV.
h
j
g
f
e
d
h
j
g
f
e
d
h
j
g
f
e
d
Hook Location
When installing the TV onto the Base Bracket.
a
b
c
*
*
* Hook positions “b” and “c” cannot be used for
the models in the table above.