Alloy Computer Products POEGEM12T2SFP User Manual

Page 51

Text mode
Original mode

POEGEM12T2SFP User Manual

Broadcast & Multicast for Ingress Rate Limiting (Policing):

Is used to set up the limit of Ingress bandwidth the port is allowed to utilise
before traffic will be discarded. If the data exceeds the limit you have set all traffic
will be discarded. The Ingress Rate Limiting will limit all broadcast and multicast
traffic. Valid range is 0 ~ 1000.

Default State: Disable

All Traffic for Egress Rate Limiting (Shaping):

Is used to set up the limit of Egress bandwidth the port is allowed to utilise before
packet transmission will be delayed. Traffic may be lost if the egress buffers are
full. The Egress Rate Limiting will limit all data including unicast, broadcast and
multicast traffic. Valid range is 0 ~ 1000.

Default State: Disable