Connecting the modem cable – Sony PCV-W600G User Manual
Page 31
Connecting the Modem Cable
31
Connecting the Modem Cable
Your computer is equipped with a single modem line jack to connect the supplied
modem cable to your telephone wall jack. To use your wall jack for your
telephone and modem lines, purchase a “1-to-2” jack adapter device (splitter).
To connect the modem cable (using a splitter)
ble (using a splitter)
1
Unplug your telephone cable from the wall jack.
2
Insert the telephone cable into one of the RJ-11 jacks on a splitter device
(optional).
3
Insert one end of the modem cable (supplied) into the other RJ-11 jack on the
splitter device.
4
Insert the plug end of the splitter device into the telephone wall jack.
5
Plug the modem cable into the modem line jack on the computer.
To connect the modem cable
Your computer has a protective sticker
covering the Ethernet port located on
the right panel. Connect only 10BASE-T and 100BASE-TX cables to the Ethernet
port. Using other cables or a telephone cable may result in an electric current
overload that can cause a malfunction, excessive heat, or fire in the port. For help
on connecting to a network, see your network administrator.
“1-to-2” jack adapter
(splitter)