Sony VPL-VW85 User Manual

Page 39

Pr
oj

ec
ting

Using the Supplied Software to Adjust the
Picture Quality (ImageDirector3)

By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired
gamma correction from a computer connected to the projector. Connect the REMOTE
connector of the projector with a computer and start-up “ImageDirector3” on the
computer.
For details on how to use the “ImageDirector3”, refer to the Help within the CD-ROM.

• You need to install the “ImageDirector3” on a computer beforehand.
• When connecting the REMOTE connector with a computer, connect while the power of the

computer and the projector is off.

• You can only perform adjustment with “ImageDirector3” when “Gamma Correction” in the

Picture menu is set to Gamma 1 to 6. Adjustment is not possible when it is set to Gamma 7 to 10
and Off.

• Before using “Image Director3,” use the Picture

menu to set “Gamma Correction” to Off or

Gamma 1 to 6.

Press

to select “Position” or

“Range,” and specify it more
delicate color position and color
range you want to adjust using

Adjust the color of the specified
portions.
Press

to select “RCP Color” or

“RCP Hue,” then adjust the color or
hue of the portions selected in step 3 to
suit your taste using

while

watching the projected picture. The
picture is returned to normal color
during adjustment.

After the adjustment is
complete, press

The RCP window disappears and the
picture of step 2 is appeared. Then
after a few seconds, normal picture is
restored.

Tip
There are some limitations on selection of
position and range.

Notes