Dip switch, 9 dip switch – Avenview SW-DVI-2X4 User Manual
Page 7
www.avenview.com
7
1.9 DIP Switch
When remote control is not available, the SW-DVI-2X4 can be configured by DIP Switch:
-
DIP Switch 1 should always be set to ON
-
When you need to configure the SW-DVI-2X4 by DIP switch, set the DIP Switch 2 at ON. Set it to OFF
only when you need to control the device with provided remote control
DIP Switch
3 ON
3 OFF
4 ON
Output 4
Output 3
4 OFF
Output 2
Output 1
Rotary switch allows you to select an Input Source or a test pattern.
Rotary Switch
Function
0
Source 1
1
Source 2
2
Pattern 1
3
Pattern 2
4
Reserved
5
Pattern 4
6
Pattern 5
7
Reserved