Sony DVP-SR201P - Manual

CD/DVD Player
DVP-SR201P
Reference Guide
© 2012 Sony Corporation Printed in China
4-400-841-21(1)
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The AC power cord must be changed only at a
qualified service shop.
Batteries or batteries installed apparatus shall
not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION
The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this CD/
DVD player is harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified personnel only.
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Precautions
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
• The player is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if the player itself has been turned off.
• Do not install this player in a confined space, such as a
bookshelf or similar unit.
• Install the player so that the AC power cord can be
unplugged from the wall socket immediately in the
event of trouble.
• If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the player. Should
this occur, the player may not operate properly. In this
case, remove the disc and leave the player turned on for
about half an hour until the moisture evaporates.
For customers in the U.S.A
Owner’s Record
The model and serial numbers are located at the rear of the
unit. Record the serial number in the space provided
below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. DVP-SR201P
Serial No.______________
CAUTION
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
b
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10)Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11)Only use attachments/accessories specified by the
manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13)Unplug this apparatus during lightning storms or when
unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Note about the discs
Do not use the following discs:
– A disc recorded in a color system other than NTSC,
such as PAL or SECAM (this player conforms to the
NTSC color system).
– A disc that has a non-standard shape (e.g., card, heart).
– A disc with a label or sticker on it.
Region code
Your player has a region code printed on the back of the
unit and only will play commercial DVDs (playback only)
labeled with identical region codes. This system is used to
protect copyrights.
Commercial DVDs labeled will also play on this
player.
Depending on the commercial DVD, there may be no
region code indication, even though playing the
commercial DVD is prohibited by area restrictions.
Copyrights and trademarks
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• “DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
• MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
• Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United States
and/or other countries.
This product contains technology subject to certain
intellectual property rights of Microsoft.
Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s)
from Microsoft.
• This product meets ENERGY STAR ® guidelines for
energy efficiency.
ENERGY STAR and the ENERGY STAR mark are
registered U.S. marks.
ENERGY STAR is a registered mark owned by the U.S.
government.
About this manual
“DVD” may be used as a general term for commercial
DVDs, DVD+RWs/DVD+Rs/DVD+R DLs (+VR mode)
and DVD-RWs/DVD-Rs/DVD-R DLs (VR mode, video
mode).
ALL
DVP–XXXX
00V 00Hz 00W NO.
0-000-000-00
X
Region code
Playback
Control Menu display
Use the Control Menu to select a function and
to view related information.
Press DISPLAY.
To change the Control Menu display, press
DISPLAY again.
A Control Menu items
B Currently playing title/Total number of
titles
C Currently playing chapter/Total number of
chapters
D Playing time
E Selected media type
F Playback status
G Selected item icon/menu options
H Operation message
I Selected Control Menu item
Menu list
◆Items for DATA files
Item Item Name, Function
TITLE/SCENE/TRACK
CHAPTER/INDEX
TRACK
Selects the title, scene, track, chapter, or index to
be played.
TIME/TEXT
Checks the elapsed time and the remaining
playback time.
Input the time code for picture and music search
(DVD only).
TOP MENU/MENU
(DVD VIDEO only)
TOP MENU: Displays the top menu.
MENU: Displays the menu.
ORIGINAL/PLAY LIST
Selects the type of title (DVD-VR mode) to be
played: ORIGINAL, or edited PLAY LIST.
PROGRAM* 1, * 2
Selects the title, chapter, or track to play in the
order you want.
1 Select “SET t,” then press ENTER and select
the title (T), chapter (C), or track (T) you want
to program, and press ENTER.
2 Repeat selecting the title, chapter, or track.
3 Press N.
SHUFFLE* 1, * 2
Plays the title, chapter, or track in random order.
REPEAT* 1, * 2
Plays all titles/tracks/albums or a single title/
chapter/track/album/file repeatedly.
A-B REPEAT* 1, * 2
Specifies the parts you want to play repeatedly.
1 During playback, select “SET t,” then press
ENTER.
The “A-B REPEAT” setting bar appears.
2 When you find the starting point (point A),
press ENTER.
3 When you reach the ending point (point B),
press ENTER again.
PARENTAL CONTROL
Set to prohibit playback on this player.
PLAYER
t: Playback of some DVD VIDEOs
can be limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes
(Parental Control).
PASSWORD
t: Enter a 4-digit password using
the number buttons. Also use this menu to change
the password.
Parental Control (limited playback)
You can set a playback limitation level.
1 Select “PLAYER t,” then press ENTER.
Enter or re-enter your 4-digit password, then
press ENTER.
OFF
OFF
SET
ON
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
Quit:
PROGRAM
ENTER DISPLAY
2 Press X/x to select “STANDARD,” then press
ENTER.
Press
X/x to select an area, then press ENTER.
When you select “OTHERS t,” select and
enter a standard code. 1 “PARENTAL
CONTROL AREA CODE LIST”
3 Press X/x to select “LEVEL,” then press
ENTER.
Press
X/x to select the level, then press
ENTER.
Parental Control setting is complete.
The lower the value, the stricter the limitation.
To turn off the Parental Control function, set
“LEVEL” to “OFF.”
If you forget your password, enter “199703” in
the password box, press ENTER, and then enter a
new 4-digit password.
SETUP
QUICK: Use Quick Setup to choose the desired
language of the on-screen display, the aspect ratio
of the TV and the audio output signal.
CUSTOM: In addition to the Quick Setup
setting, you can adjust various other settings.
1 “CUSTOM Menu”
RESET: Returns the settings in “SETUP” to the
default setting.
ZOOM* 1
Magnifies the image up to four times the original
size, scroll using
C/X/x/c.
ANGLE
Changes the angle.
CUSTOM PICTURE MODE
Selects the picture quality that best suits the
program you are watching.
STANDARD: Displays a standard picture.
DYNAMIC: Produces a bold dynamic picture by
increasing the picture contrast and the color
intensity.
CINEMA: Enhances details in dark areas by
increasing the black level.
MEMORY
t: Adjusts the picture in greater
detail.
SHARPNESS
Exaggerates the outline of the image to produce a
sharper picture.
OFF: Cancels this option.
1: Enhances the outline.
2: Enhances the outline more than 1.
* 1 To return to normal play, select “OFF” or press
CLEAR.
* 2 The play mode is canceled when:
– you open the disc tray.
– you turn off the player.
Item Item Name, Function
ALBUM
Selects the album that contains music and photo
files to be played.
FILE
Selects the photo file to be played.
ALBUM
Selects the album that contains the video file to be
played.
FILE
Selects the video file to be played.
DATE
Displays the date the picture was taken by a
digital camera.
INTERVAL*
Specifies the duration for which the slides are
displayed on the screen.
EFFECT*
Selects the effects to be used for changing slides
during a slide show.
MODE 1: The images randomly cycle through
the effects.
MODE 2: The image sweeps in from top left to
bottom right.
MODE 3: The image sweeps in from top to
bottom.
MODE 4: The image sweeps in from left to right.
MODE 5: The image stretches out from the
center of the screen.
OFF: Turns off this function.
MEDIA
Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music files
as a slide show. You can view a slide show with
sound when music and photo files are placed in
the same album. If the playing time of either
music or photos is longer, the longer one
continues without sound or image.
PHOTO: Plays photo files.
MUSIC: Plays music files. Press SUBTITLE
while playing music files that contain
unsynchronized lyric information. The player
supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be
possible.