Sony PCV-J150 - Manual (Page 51)

Removing, Installing, and Replacing Components 37
8
Align the memory module over the appropriate socket, noting the
location of pin 1 on the module and pin 1 on the socket.
9
Carefully but firmly insert the edge of the module into the socket.
10
Press down firmly and evenly at both corners until the module is
fully seated.
✍
Gently push the power supply cables and ribbon cables aside as you slip your
hands into the system to reach the module connector.
✍
When the module is fully seated, the handles on each side are straight up
and locked into the slot on each side of the module. If the handles are not
totally straight upright, continue to press down on each side of the module
until the handles lock into place.
1
Memory module (DIMM)
Handles
Press down
here