Axis Communications AXIS 233D - Manual (Page 8)

8 AXIS 233D - Product Overview
Serial number - This number is located on the product label at the base of the camera and
is used during installation and restoring the camera to factory default settings. Included in
the package is an extra product label, put this in a safe place for future reference.
Restart button - This button power cycles the camera and is to be used during firmware
upgrade or factory reset.
Control button - This button is used to restore the factory default settings as described in
Resetting to Factory Default Settings, on page 51.
For instructions on how to install the AXIS 233D please refer to the Installation Guide
which is supplied with the product in printed format or in PDF format from the Axis Web
site at http://www.axis.com
Status LED Indicator
After completion of the startup and self test routines, the indicator flashes as follows. For
more indicator flash routines see page 58.
Unlit Steady connection/normal operation
Amber Steady for system initiating. Flashes during
firmware upgrade or reset to factory
default
Amber/red Flashes amber/red for no network connec-
tion
Red Flashes red for firmware upgrade failure
Green Shows steady green for 10 sec. for normal
operation after restart
Color Description