Sony DAV-FX100W - Manual (Page 23)

Ge
tting Star
te
d
23 US
4
Attach the wall-mount pads on the rear side of the speaker.
5
Hang the speakers on the screws.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Note
Wall-mount pads
(7 × 7 mm, 3 mm thick)
(
9
/
32
×
9
/
32
inch,
1
/
8
inch thick)
4.6 mm
(
3
/
16
inch)
10 mm
(
13
/
32
inch)
Hole on the back of
the speaker