Sony PCG-R505TSK - Manual (Page 81)

Connecting an External Display
81
3 Plug the audio cable into the green Headphone connector on the right side of
the notebook.
To Select a Display
When you connect an external display to the monitor connector, you can press
Fn+F7 to toggle the output between the Liquid Crystal Display (LCD), the
external monitor, or both devices. See “Selecting the Display Mode” for more
information.
Connecting projector
✍
Note the following:
❑ See the manual that came with your projector for more information on
installation and operation.
❑ You cannot use the Monitor connector on your notebook when the docking
station is connected to the notebook.
Projector
Power cord
RGB signal cable
To Headphone
Audio cable
connector