Sony SLV-D570H - Manual (Page 65)

D
V
D Se
ttings
and
Adjus
tme
nts
65 US Screen Setup
To cancel the “Progressive” setting
Select “ Off ” in step 2.
You can also cancel by pressing SELECT DVD and then press X on the unit
continuously for 5 seconds or more when the DVD-VCR is in stop mode.
Note
• If you select progressive signal when you connect the DVD-VCR to a TV that cannot accept
the signal in progressive format, the image quality will deteriorate. In this case, set
“Progressive” to “Off”.
• When you connect the DVD-VCR to a TV using HDMI cord, you cannot cancel the
“Progressive” setting.
4 If video signal appears OK, video connection is complete.
Press ENTER.
The PROGRESSIVE indicator on the unit lights up in orange.
If picture is distorted, press O RETURN. Check the connection (page 32).
5 Press SET UP to exit the menu.
PROGRESSIVE indicator