Sony VGF-HS1 - Manual (Page 2)

1 Connect the supplied network (LAN) cable to the network (LAN) port on the back of your Home Server.
2 Connect your Home Server to a power outlet with the supplied AC adapter.
z Tip
Please refer to the Setup Guide for detailed instructions on connecting to a network.
3 Attach the rear cover.
Installing Software
Turning On/Off
Turning on your Home Server
1 Press the 1 (POWER) button for about 2 seconds
until the 1 (POWER) indicator light blinks in orange.
When the Home Server is completely turned on, the
power indicator light stops blinking and turns
green.
Turning off your Home Server
1 Press the 1 (POWER) button for about 2 seconds
until the 1 (POWER) indicator light blinks in green.
z Tip
Your Home Server is designed to be always on and has
power saving features to reduce energy use when no being
accessed.
1 Insert the supplied CD-ROM disc into the optical
disc drive of your computer.
2 The License Agreement is displayed, read the
terms and conditions, select “I accept the terms of
the license agreement,” and click “Next.”
The software setup window appears.
3 Click “PC Link” 1 and then “Install” 2.
2
1
4 Click “Next” on the InstallShield Wizard.
5 Click “Finish” upon completion of the software
installation.
6 Click “Next” when the PC Link software starts.
Connecting
7 Select a Home Server and click “Next.”
8 Select your desired folder(s).
z Tip
If the above window does not appear, please refer to
“When your Home Server has a global IP address” (page
47) in the Setup Guide.
9 Finish the setup.
When you click “Close,” the PC Link software will
begin to upload the selected folders.
The PC Link software provides you with easy ways to keep your folder content updated (data synchronization)
between your personal computer and your Home Server.
1 (POWER) button / 1 (POWER) indicator light
Router
To the network (LAN) port
4 To an AC outlet
Power cord
(supplied)
AC adapter
(supplied)
3 To the AC adapter
1 To DC IN 19.5V
2