Sony KLV-S19A10 - Manual (Page 6)

4
(US)
Step 6: Install the display on the
Plate Unit
Refer to the Instructions for the SU-LW1.
1 Align the holes on the Mounting
Hook Units with the
corresponding holes on the rear
of the display.
Secure them to the display using four screws
(supplied).
Note
When using an electric screwdriver to tighten
the screws, the torque must be approx. 2 N•m.
2 Connect the supplied power cord
and cables.
Connect the power cord and cables to the
corresponding jacks on the rear of the display.
For details on the cable connection, refer to the
Operating Instructions for your TV.
3 Mount the display on the Plate
Unit.
The supplied screws
(+PSW5
× L16)
Mounting Hook Units