Sony BDV-N8100W - Manual (Page 29)

29 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\040GET.fm masterpage: Right
G
e
tt
ing
Started
Step 4: Setting up the
Wireless System
The main unit transmits sound to the
surround amplifier that is connected to the
surround speakers. To activate wireless
transmission, perform the following Steps.
1
Insert the wireless transceiver
into the main unit.
2
Insert the wireless transceiver
into the surround amplifier.
3
Connect the AC power cord
(mains lead) of the main unit.
Before connecting the AC power cord,
make sure all connections in “Step 2:
Connecting the System” (page 22) are
secure.
4
Press "/1 to turn on the system.
5
Connect the AC power cord
(mains lead) of the surround
amplifier.
When wireless transmission is
activated, the LINK/STANDBY
indicator turns green.
If the LINK/STANDBY indicator does
not turn on, see “Wireless sound”
(page 72).
Rear panel of the main unit
Wireless transceiver
Rear panel of the surround amplifier
Wireless transceiver
"/1
LINK/STANDBY indicator